NRVIA certified rv inspector badgeWe at RV Roof Repair Florida appreciate your business and look forward to providing you with the most thorough and advanced RV inspections available in Florida. We are highly trained RV experts and certified by the National Recreational Vehicle Inspectors Association (NRVIA) who currently work out of Palm City, Florida.

We understand that our customers want their RV inspections to be as thorough and accurate as possible and we strive to give the utmost superior service each time we complete a Level I or Level II inspection.

Level I Inspection

This inspection is a basic visual inspection only. We check the RV roof for leaks or any kinds of damage. We also visually inspect windows for any kinds of issues or leaking. We are looking for anything that is seemingly out of place or out of alignment with customary standards of the exterior.

Level II Inspection

Our Level II inspection is a much more involved and thorough RV inspection with supporting images and documentation. We have a lot of customers that are here from other areas of the country and they are shopping for RVs here in Southeast Florida and we like to help them make informed purchase decisions.

A Level II inspection is highly recommended as a pre-purchase inspection survey before you buy a pre-owned RV, especially if it's a class A, B, or C motorhome.

Why You Should Get A Level II Inspection

Buyers are often looking at the aesthetics of the RV to determine that it will meet their travel and comfort needs. The excitement of purchasing a new (to the buyer) RV can lead the buyer to overlook the obvious and hidden condition of the RV. We inspect each RV using our inspection checklist in a methodical and detached manner providing a truly unbiased inspection. Confirming what you believe to be true is a good thing. Finding real or potential problems that you may have overlooked before you buy is even better.

The Level II inspection provides an independent and unbiased assessment of the current operating condition of the RV you are planning to purchase. If everything is in good operating condition, the report will provide confirmation of that. However, in the case where components are not working, the report lets you, (the buyer) know the true condition of the RV before you purchase it. This could be the basis for further negotiation with the seller or your backing out of the deal totally. 

For more info please see our FAQs below or click here.

 

If you have any questions or are ready to schedule your RV inspection, click the number below.

Click To Call 1-888-306-8886

 

Below is our list of Level II Inspection Criteria:

So that we may provide you with a thorough inspection, your RV will need to be hooked up to all the utilities…fresh water, electricity and sewer during the inspection.

Due to the nature of RV absorption refrigerators and the time it takes for these refrigerators to cool, the refrigerator must have been in operation for at least 12 hours before an accurate temperature reading can be taken in the freezer and the refrigerator compartments.

This report will consist of corroborating photos describing the items that have been identified during the detailed Level II Motor Home Inspection. *The Level II Motor Home Inspection provides analysis for two (2) fluid systems. Additional analysis can be pre-purchased and will be performed at the time of the inspection.

Roof

  • Inspect and rate the overall roof condition
  • Identify the roof material type and the sealants that have been applied to the roof
  • Evaluate the condition of the various sealant and joints around the roofing components
  • Rate the condition of the roof vents, air conditioners, antenna and other components that are mounted on the roof
  • Identify areas of concern and potential water intrusion points

Sidewall and End Caps

  • Inspect and identify the material type of the front and rear caps
  • Evaluate the aging and general overall condition of the front and rear caps
  • Inspect and evaluate the appearance and functional condition of the end caps, sidewalls, entrance doors, windows and cargo access doors
  • Inspect and evaluate any damage, discoloration and delamination of the side wall and end cap components

Slideout Rooms

  • Identify the types of slideout room drive systems
  • Identify the type of roof material for the slideout room
  • Inspect and rate the roof condition
  • Inspect and evaluate the condition of the seals, sweeps and gaskets for possible damage
  • Evaluate the attached wiring and utility harness that feed underneath the slideout room

Awnings and Slideout Toppers

  • Inspect and identify the operational type (manual vs. electric) of the awnings, slideout toppers and window awnings
  • Operate and rate condition of the awning frames and latching mechanisms
  • Evaluate and rate the condition of fabric material of the awnings
  • Measure and document the fabric size of the awnings

Chassis Turn Signal and Running Lights (12 volt DC)

  • Inspect the condition of the 7 pin connector receptacle
  • Activate and evaluate the operation of the DOT lights
  • Visually inspect the chassis battery compartment, the electrical connections and batteries

120 Volt AC Electrical System (house type power)

  • Inspect and rate the condition of the power cord and its connection ends
  • Identify any damage or repair of the power cord
  • Remove cover panel of the 120 volt circuit breaker box to visually inspect the condition of the wiring, circuit breakers and grounding connections
  • List any heat discoloration to the wiring and connections
  • Verify the separation of all the wiring types
  • Test and verify the output operation of the 120 VAC to 12 VDC converter for charging of the deep cycle batteries

Generator- Engine – if installed *strongly recommend performing oil analysis to determine internal combustion engine component condition.

  • Identify and note the model, serial number and run hours of the generator
  • Check oil level
  • Start and operate the onboard generator
  • Test the voltage output and frequency (60 cycles)
  • Put generator under a load to verify operation (typically operating 1 air conditioner will create the correct amount of load)

Generator - Radiator - if installed on this model of Generator *strongly recommend performing coolant analysis to determine the condition of the coolant fluid and the internal cooling system.

  • Location of the radiator and cooling fans
  • Visually inspect the coolant reservoir, radiator and hoses

Inverter – if installed

  • Identify and note the model and serial number of the inverter
  • Visually inspect the wiring and electrical connections and fuses/circuit breakers
  • Place electrical load on the inverter to verify proper operation

Coach Battery System – (12 volt DC deep cycle Battery Electrical System)

  • Locate and note the location of the battery stack
  • Evaluate the condition, age and matched sizing of the battery stack
  • Evaluate and determine if positive and negative cables are correctly matched for balanced load
  • Access and visually inspect the wiring, fuse panel and fuses of the 12 volt DC electrical system
  • Evaluate the operation of the fresh water /waste water monitor panel for incorrect tank readings

Fresh Water System

  • Verify the fresh water connections for the city water hookup are operational
  • Test and verify proper filling of the fresh water tank
  • Verify the onboard fresh water tank and pressure pump system will operate and maintain pressure
  • Operationally test all fresh water fixtures inside and outside of the RV
  • Visually inspect the water filtration system (if installed) for leaks and filter placement

Waste Water Systems – (Gray and Black Water)

  • Operationally test and inspect both waste (gray and black) plumbing systems for leaks under the sinks, shower, around the toilet and discharge lines
  • Identify the type drain valve controls
  • Verify the drain valves for both systems will maintain water in their tanks
  • Operate both drain valves and test for ease of operation
  • Verify the drain cap is in place and will hold waste water

Life Safety Items

  • Perform and document LP gas timed leak test at cooktop burner spud for 5 minutes at 8 inches of water column gas pressure
  • Test the Ground Fault Circuit Interrupter (GFCI) circuits in the 6 foot range of the water areas of the bathroom, kitchen and exterior receptacles
  • Test all wall receptacles for correct polarity and ground fault
  • Test the exterior skin for hot skin that would cause electrical shock
  • Emergency Exit Windows – Verify all safety windows are operational
  • Fire Extinguisher – Verify unit is secure in bracket and dial indicates extinguisher is fully charged
  • Smoke/Fire Detector –Test and verify operation of unit and document expiration date of detector
  • Carbon Monoxide Detector (if applicable) – Test and verify operation of unit and document expiration date of detector
  • LP Gas Detector – Verify gas detection and audio alarm and document expiration date of detector
  • Verify the rubber grommet is properly sealed around LP gas line of water heater

LP Gas System

  • Visually inspect all hoses and pressure regulators for damage and age deterioration
  • Verify the plastic cover has been installed over the regulator

ASME tank - if equipped

  • Conduct a visual inspection of tank for rust or physical damage if tank is accessible
  • List the location of the tank
  • Document the manufacture date of the ASME tank if accessible
  • List the gallon capacity of the tank

Refrigerator

  • Identify the brand, model and type of refrigerator
  • Note the location of the vent panels used by refrigerator
  • Operate on all heat sources - 120 volt AC, LP gas and for 3 way refrigerators, 12 volt DC
  • Collect serial and model number and verify with manufacturer if recall notice has been issued and completed for this unit
  • Visually verify if baffle system on back of refrigerator area is correct and directing heat away from gas coils
  • Test for interior temperature of upper and lower refrigerator compartments and ice maker (if installed) *if refrigerator has been operating for minimum of 12 hours
  • Check condition of door frame, shelving, crisper drawers, door shelves and interior light
  • Evaluate and rate the door gasket seals of freezer and refrigerator box areas

Water Heater - if equipped

  • Identify the brand, model and type of water heater
  • Visually inspect burner assembly and gas exhaust system for blockages and insect infestation
  • Fill tank with water (if necessary) and verify operation on all heat sources – LP gas and 120 volt AC if equipped with heating element
  • If installed, operate and verify positioning of bypass valves on back of water heater
  • Determine if proper drain plug has been installed in water heater tank
  • If installed, inspect and evaluate if the correct type of dauber screen is being used

Furnace – if equipped

  • If accessible, identify the brand, model and type of furnace(s) that have been installed
  • Identify the type of thermostat controls being used to operate furnace(s)
  • Visually inspect air intake and exhaust assemblies for blockages and insect infestation
  • Operate and verify warm air discharge out of vents and proper return air flow to unit
  • Monitor for unusual noise or vibration of blower motor
  • If installed, inspect and evaluate if the correct type of dauber screen is being used

Cooktop/ Stove

  • Evaluate and rate the condition of the cooktop or stove
  • List presence and condition of stove top covers
  • Verify the ignition and operation of all top burners and the oven flame (if equipped)
  • Inspect and rate the condition of the metal grill top and rubber grommets of top burner area
  • Evaluate the presence of the control knobs, door handles and oven racks of the unit

Air Conditioner(s)

  • Identify and list the type of cooling unit/heat pump
  • Perform cooling efficiency test (Delta T) on each unit
  • Visually inspect the plenum box and ductwork sealing
  • Inspect the air filter, cooling and the heat exhaust coils for debris and cleanliness

Washer/ Dryer

  • Visually inspect and verify a wash and rinse cycle of the washer and dryer
  • Visually inspect for leaks or damaged hoses
  • Evaluate and rate the exterior condition of the dryer exhaust vent

Microwave/Convection Oven

  • Identify and list the brand, model, type and output wattage of the unit
  • Verify the rack and turn tables are installed
  • Operate unit for 60 seconds utilizing cup of water and then list water temperature

Dishwasher - if installed

  • Identify and list the brand and model of unit
  • Verify operation of unit and inspect for leaks and non- functioning rotating racks and wash bars

In House Vacuum System – if installed

  • Identify and list the brand and model of unit
  • Verify the operation and visually inspect the various components of the hose assembly, access doors and dirt bag

Electric Fireplace – if installed

  • Identify and list the brand and model of unit
  • Operate and verify the various heat settings, fan speed levels and the back lighting

Cooktop Exhaust Fan

  • Operate and verify condition of the exhaust function and fan speeds
  • Visually inspect the filter and lighting
  • Evaluate and rate the exterior condition of the exhaust vent

Ceiling Mounted Fans and Ceiling Exhaust Vents

  • Visually inspect the condition of the blades and motor
  • Operate and verify condition of the blade direction and fan speeds
  • Verify lighting if equipped

Interior Conditions and Appearance

  • Visually inspect all ceilings, walls, interior doors and flooring for signs of water intrusion, surface damage and/or staining
  • Operate all windows and doors noting any deficiencies or missing components
  • Evaluate the window coverings
  • Operate all interior, exterior and décor lighting - 12 volt and 120 volt

Cabinets and Closet Condition

  • Inspect and evaluate all cabinet doors, drawers and pull out operation
  • Visually inspect all counter tops and flat surface areas of the kitchen, living room, bathroom, bedroom and storage areas for scratches and damage
  • Identify and list all broken and loose cabinet and closet hardware
  • Note if appearance of previous damage repairs have been performed

Furniture

  • Visually inspect the condition of the dinette table/booth, chairs, recliners and sofa
  • Inspect and note furniture fabric tears, discoloration and signs of excessive wear
  • Visually inspect and note signs of mattress damage or staining

Entertainment System

  • Visually inspect and operate all TV and stereo equipment
  • Verify DVD/disc players and radios are operational
  • Verify local channels antenna and 12 volt DC power signal booster is operational
  • Raise and lower roof mounted antenna if equipped
  • Verify remotes are operational

Shower/Tub Enclosure

  • Visually inspect the glass panels, curtains and soap dish areas
  • Evaluate and rate the seals around the frame work and doors for water leaks
  • Operate the door and latch system to verify its operation
  • Inspect and evaluate the stains and chemical/mineral build up

Motor Home

Please note the following items: Due to insurance restrictions the Motor Home can NOT be driven by the Inspector. Also, the lack of clearance under the motor home and safety issues the Inspector will conduct the following visual inspections from the outer perimeter of the motor home.

  • Chassis and Undercarriage
  • Visually inspect for rust, damage and excessive oil on the underside of the motor home

Steering

  • Visually inspect for bent or damaged components and hydraulic leaks

Leveling System

  • Identify and note the brand and type of system
  • Verify the system operates properly by extending and retracting leveling system
  • Note visual indications of hydraulic leaks or mechanic issues

Engine *strongly recommend performing oil analysis to determine internal combustion engine component condition.

  • Make and model of the engine
  • Verify oil level on the dipstick
  • Indications of engine issues or any noises while running
  • Are there noticeable oil or exhaust leaks
  • Note the oil pressure reading on the dash gauges

Radiator *strongly recommend performing coolant analysis to determine the condition of the coolant fluid and the internal cooling system.

  • Location of the radiator and cooling fans
  • Visually inspect the coolant reservoir, radiator and hoses

Transmission *strongly recommend performing transmission fluid analysis to determine the condition of the fluid and the internal components of the transmission.

  • Type of transmission
  • Fluid level on dipstick
  • Indications of contaminated transmission fluid

Running Gear (Motor Home)

  • Type and number of axles
  • Weight ratings for each axle set
  • Inspect the frame, axles, springs, rims and other components for rust, oil stains and visible damage
  • Document the information on the tires as to their age and weight capacities
  • Check tire pressure
  • Inspect and rate tire tread condition
  • Note any valve extensions and pressure monitors

Hitch System/Hook Up

  • Inspect and identify the type of system used to tow vehicles
  • Evaluate and list modifications to hitch system

Weight Labels and Data Plates

  • Identify and document the Vehicle Identification Number (VIN)
  • Locate and document Vehicle Frame Number
  • Document the license plate info
  • List the inspection sticker information – if applicable
  • List the RVIA inspection seal number
  • List the Gross Vehicle Weight Rating
  • List date of manufacture

FAQs

How do I prepare for a RV Inspection?

The best conditions for an inspection include ALL of the following:

  • The RV should be connected to water, electric, and sewer utilities and the refrigerator turned on at least 12 hours before the inspection.
  • The on-demand water tank should contain approximately 1/3 or more of water.
  • The owner should remove all non-RV specific items from walkways and around the RV for easy access of all inspection items.
  • All owner and appliance manuals and keys should be made available to the inspector.
  • The owner/seller should be present at the start of the inspection, and if possible, remain available throughout the inspection.
  • The pre-inspection agreement and payment must be made BEFORE the inspector arrives at the inspection.

Will you tell me if I should buy the RV or not?

RV Roof Repair Florida provides a third party, unbiased inspection of the RV and only provides a final report highlighting the life safety, major, and minor issues identified with the inspection. With the inspection in hand, the buyer may then:

  • Negotiate a price with the seller based on issues identified in the inspection
  • Negotiate with the seller what items should be repaired before the vehicle is purchased
  • Have the item further examined by a certified RV technician to determine whether repair is even necessary, or find another RV to purchase
  • We do not provide an opinion on the value of the RV or help in any of the negotiations.

How do I keep the dealer from selling the RV while I get it inspected?

It is possible to sign a pre-purchase agreement with the seller that makes the purchase contingent upon inspection and financing. It is highly recommended that you consult with a lawyer when initiating a contract.

I found a great RV to purchase and I live a long distance away. How can RV Inspections in Florida help me?

We conduct the inspection and digital pictures of the RV that are included in the inspection report. Photos of identified problem areas are provided, so that you can see first-hand what the RV inspector found. 

I found a great RV. When does RV Roof Repair Florida get involved?

It works best if you, the buyer, find the RV you are interested in purchasing and negotiate a price that you are willing to pay based on the assumption that what the seller has represented to you is correct. Make sure that you specify, and put in writing, that the deal is contingent on an inspection from an independent inspector of your choice to confirm what the seller has represented to be true. Be clear about what you expect and get it in writing.

We will inspect the RV using our detailed inspection checklist. The inspection report will identify in detail the current state of the RV. After the inspection is completed, report reviewed and pictures analyzed, you then decide how to proceed. If what you expected was confirmed to be true, you can buy with more confidence. If the inspection finds issues that concern you, then you have alternatives. You can renegotiate the purchase price based on the inspection report or you can request the seller to fix the items that concern you or you can walk away from the deal.

How much does an RV inspection cost?

The cost varies depending on the type of RV being inspected and the location of the RV, and the number of fluid samples being requested. The final pricing is determined at contract execution time.

How long will the RV inspection take?

A full inspection will take between 5 and 6 hours, depending on the type of unit and features. When possible, it is helpful to have the seller/owner available to move or remove any items necessary to complete the inspection, but it is not a requirement.

If you have any questions or are ready to schedule your RV inspection, click the number below.

Click To Call 1-888-306-8886